3D Printed - Water Stand for Baby Chicks - Reduce the amount of shavings your baby chicks get in their water bowl - water/food stand.
from $5.00
My young chicks constantly flip their shavings/bedding into their water bowl...Like many out there I was in a constant battle trying to keep my chick's water clean.
The item I have in this post has been made on a 3D printer. I currently have 2 stands in my chick's brooder box, one for their water and one for their food. (See video in this post and on my TikTok). The area needed for a stand is not much wider than the chick starter water and/or food base.
The water and food base does fit in the stand allowing it the stability it needs when the chicks are running around their brooder box. In the past I did what many do with the chick's starter water which is use a brick to elevate it away from their bedding... even after doing that there were a few occasions the chicks still managed to knock the water over and soak part of the bedding. I have found this stand helps reduce the mess caused by the water tipping along with helping reduce the amount of bedding that ends up in their water.
The options in this post are as follows...
Option #1 - One stand
Option #2 - One stand, one rake to fluff up and rotate the shavings/bedding
Option #3 - Two stands
Option #4 - Two stands, one rake
Items on hand - At this time I am making items as orders come in.
**Shipping is Priority only. Items will be bubble wrapped and shipped in a box.
**Returns** - Due to the nature of this item and being used with livestock I cannot accept returns.
If you have any questions, please contact me prior to purchasing.
These items can be purchased in bulk, please contact me regarding pricing.
The item I have in this post has been made on a 3D printer. I currently have 2 stands in my chick's brooder box, one for their water and one for their food. (See video in this post and on my TikTok). The area needed for a stand is not much wider than the chick starter water and/or food base.
The water and food base does fit in the stand allowing it the stability it needs when the chicks are running around their brooder box. In the past I did what many do with the chick's starter water which is use a brick to elevate it away from their bedding... even after doing that there were a few occasions the chicks still managed to knock the water over and soak part of the bedding. I have found this stand helps reduce the mess caused by the water tipping along with helping reduce the amount of bedding that ends up in their water.
The options in this post are as follows...
Option #1 - One stand
Option #2 - One stand, one rake to fluff up and rotate the shavings/bedding
Option #3 - Two stands
Option #4 - Two stands, one rake
Items on hand - At this time I am making items as orders come in.
**Shipping is Priority only. Items will be bubble wrapped and shipped in a box.
**Returns** - Due to the nature of this item and being used with livestock I cannot accept returns.
If you have any questions, please contact me prior to purchasing.
These items can be purchased in bulk, please contact me regarding pricing.
Available Options:
Height:
Quantity:
My young chicks constantly flip their shavings/bedding into their water bowl...Like many out there I was in a constant battle trying to keep my chick's water clean.
The item I have in this post has been made on a 3D printer. I currently have 2 stands in my chick's brooder box, one for their water and one for their food. (See video in this post and on my TikTok). The area needed for a stand is not much wider than the chick starter water and/or food base.
The water and food base does fit in the stand allowing it the stability it needs when the chicks are running around their brooder box. In the past I did what many do with the chick's starter water which is use a brick to elevate it away from their bedding... even after doing that there were a few occasions the chicks still managed to knock the water over and soak part of the bedding. I have found this stand helps reduce the mess caused by the water tipping along with helping reduce the amount of bedding that ends up in their water.
The options in this post are as follows...
Option #1 - One stand
Option #2 - One stand, one rake to fluff up and rotate the shavings/bedding
Option #3 - Two stands
Option #4 - Two stands, one rake
Items on hand - At this time I am making items as orders come in.
**Shipping is Priority only. Items will be bubble wrapped and shipped in a box.
**Returns** - Due to the nature of this item and being used with livestock I cannot accept returns.
If you have any questions, please contact me prior to purchasing.
These items can be purchased in bulk, please contact me regarding pricing.
The item I have in this post has been made on a 3D printer. I currently have 2 stands in my chick's brooder box, one for their water and one for their food. (See video in this post and on my TikTok). The area needed for a stand is not much wider than the chick starter water and/or food base.
The water and food base does fit in the stand allowing it the stability it needs when the chicks are running around their brooder box. In the past I did what many do with the chick's starter water which is use a brick to elevate it away from their bedding... even after doing that there were a few occasions the chicks still managed to knock the water over and soak part of the bedding. I have found this stand helps reduce the mess caused by the water tipping along with helping reduce the amount of bedding that ends up in their water.
The options in this post are as follows...
Option #1 - One stand
Option #2 - One stand, one rake to fluff up and rotate the shavings/bedding
Option #3 - Two stands
Option #4 - Two stands, one rake
Items on hand - At this time I am making items as orders come in.
**Shipping is Priority only. Items will be bubble wrapped and shipped in a box.
**Returns** - Due to the nature of this item and being used with livestock I cannot accept returns.
If you have any questions, please contact me prior to purchasing.
These items can be purchased in bulk, please contact me regarding pricing.
My young chicks constantly flip their shavings/bedding into their water bowl...Like many out there I was in a constant battle trying to keep my chick's water clean.
The item I have in this post has been made on a 3D printer. I currently have 2 stands in my chick's brooder box, one for their water and one for their food. (See video in this post and on my TikTok). The area needed for a stand is not much wider than the chick starter water and/or food base.
The water and food base does fit in the stand allowing it the stability it needs when the chicks are running around their brooder box. In the past I did what many do with the chick's starter water which is use a brick to elevate it away from their bedding... even after doing that there were a few occasions the chicks still managed to knock the water over and soak part of the bedding. I have found this stand helps reduce the mess caused by the water tipping along with helping reduce the amount of bedding that ends up in their water.
The options in this post are as follows...
Option #1 - One stand
Option #2 - One stand, one rake to fluff up and rotate the shavings/bedding
Option #3 - Two stands
Option #4 - Two stands, one rake
Items on hand - At this time I am making items as orders come in.
**Shipping is Priority only. Items will be bubble wrapped and shipped in a box.
**Returns** - Due to the nature of this item and being used with livestock I cannot accept returns.
If you have any questions, please contact me prior to purchasing.
These items can be purchased in bulk, please contact me regarding pricing.
The item I have in this post has been made on a 3D printer. I currently have 2 stands in my chick's brooder box, one for their water and one for their food. (See video in this post and on my TikTok). The area needed for a stand is not much wider than the chick starter water and/or food base.
The water and food base does fit in the stand allowing it the stability it needs when the chicks are running around their brooder box. In the past I did what many do with the chick's starter water which is use a brick to elevate it away from their bedding... even after doing that there were a few occasions the chicks still managed to knock the water over and soak part of the bedding. I have found this stand helps reduce the mess caused by the water tipping along with helping reduce the amount of bedding that ends up in their water.
The options in this post are as follows...
Option #1 - One stand
Option #2 - One stand, one rake to fluff up and rotate the shavings/bedding
Option #3 - Two stands
Option #4 - Two stands, one rake
Items on hand - At this time I am making items as orders come in.
**Shipping is Priority only. Items will be bubble wrapped and shipped in a box.
**Returns** - Due to the nature of this item and being used with livestock I cannot accept returns.
If you have any questions, please contact me prior to purchasing.
These items can be purchased in bulk, please contact me regarding pricing.